INSTALLATION
6
■
Center the installation brackets or extension brackets on your marks and mark where to
drill the screw holes.
➤
A minimum 1
1
⁄
8
" flat vertical surface is required for the installation brackets. Extension
brackets require 1
1
⁄
4
".
➤
The top of the installation brackets or extension brackets should be at the desired
height. The brackets should be level and aligned to each other.
CAUTION:
The rear of the brackets must be flush against a flat mounting surface. Do not
mount brackets on curved molding.
■
Drill the screw holes using a
3
⁄
32
" drill bit.
CAUTION:
Use drywall anchors
when mounting into drywall.
■
Attach the installation or
extension brackets using the
screws provided.
IMPORTANT:
The top of the
installation brackets or
extension brackets must be level
with their front edges aligned.
■
If using spacer blocks, attach the spacer block(s)
and installation bracket to a flat vertical mounting
surface with #6 screws long enough for a secure
installation.
➤
The top of the spacer blocks should be at the
desired shade height.
IMPORTANT:
Do not add more than 1
1
⁄
2
" of
clearance using spacer blocks.
IMPORTANT:
The tops of the installation brackets
must be level with the front edges aligned.
CAUTION:
Use drywall anchors when mounting into drywall.
IMPORTANT:
If using a rechargeable battery wand, use two
1
⁄
2
" spacer blocks per
installation bracket to provide the clearance required for the rechargeable battery wand.
1
1
∕
8
"
Extension
Bracket
1
1
∕
4
"
1
1
∕
2
"
Maximum
Spacer
Blocks
Longer
Screw
