HunterDouglas Luxaflex PowerView, Reference Manual

Page: 20 / 23

7.2. Network reset
This procedure will erase all network data stored in the motor, including Network ID and Group assignments. It will not
clear the end limits. Completing a Network reset will prevent a PowerView® remote or App from operating the window
covering until it is reprogrammed.
7.1.3 Apply power to the motor by disconnecting the USB-C
connector while press and hold the
manual control
button .
the motor LED turns orange after power is
applied
7.1.4 Hold the
manual control button
until the motor
jogs 1x.
The end limits have been cleared and the motor will
re-boot.
MANUAL
Page 20 of 23 version: 1.0