HunterDouglas EverWood Operating Systems Download | Manualshive

Page: 26 / 36

background image

OPERATION

24

Further Operation and Programming Information

PowerView

®

App

The PowerView

®

App is required to program PowerView Gen 3 blinds, remotes, and

gateways. The App is compatible with Apple

®

and Android

™

smartphones and tablets. For

more information regarding setup and operation using the PowerView App, refer to

https://help.hunterdouglas.com/s/powerview-gen-3-manuals

PowerView

®

Gen 3 Gateway

The PowerView

®

Gen 3 Gateway is used to control shades in larger projects as well as

integrate PowerView Gen 3 shades with third-party integration systems. For information
regarding programming of PowerView Gen 3 Gateways, refer to the

PowerView Gen 3

Automation Gateway Guide.

PowerView Gen 3 Remote

For more information regarding operation and programming of the PowerView Gen 3 Remote,
refer to the

PowerView Gen 3 Automation Remote Control Guide.

Resetting the Blind (If Necessary)

Calibration Reset

The calibration reset is used to recalibrate the blind's travel limits. This action is performed in
the PowerView

®

App.

■

Select Calibrate Shades in the Advanced Options section of the Shade Settings menu in
the PowerView App.

■

The slats will tilt to their end limits, then finish in the closed position. When the slats
stop moving, the calibration is complete.

Resetting Blind Programming

The PowerView App may be used to modify or reset any blind programming to PowerView
Gen 3 remotes, gateways, and scene controllers. Blinds may be added to or removed from
Rooms and Scenes in the app at any time. If necessary, blindsmay also be deleted from the
PowerView App in the Advanced Options section of the Shade Settings menu.

Electronic Limit Adjustments

Electronic limits are set at the factory and normally do not require readjustment. For window
treatments that may need additional adjustment or to set custom limit positions, go to Shade
Settings in the PowerView App to adjust limits.

«
...
24
25
26
27
28
...
»

Summary of Contents for EverWood





































Reviews:

No comments

Related manuals for EverWood

Brand: Ziptrak Pages: 4

Brand: Plissees Pages: 5

Brand: Graywind Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands