background image

SYSTEM OFF

Stops all watering. 

Turn dial to 

System Off

 position to stop unexpected watering immediately. 

Wait 2 seconds for 

OFF

 to appear in display.

RAIN OFF:

 When display says 

OFF

, press 

+

 or 

 to set a number of days off, 

then turn dial back to Run.

SET DATE AND TIME

Sets the controller date/time like a clock, so it will water at the right time on  
the right day.

Turn dial to 

Date/Time

.

YEAR:

 Press 

+

 or 

 to set .

Press 

„

 to advance to month.

MONTH: 

Press 

+

 or 

 to set.

Press 

„

 to advance to DAY.

DAY:

 Press 

+

 or 

 to set date. Press 

„

 to advance to 

TIME

.

TIME:

 Press 

+

 or 

 to select AM, PM, or 24 HR. Press 

„

 to set the hour, 

+

 or 

 to change the hour. Press 

„

 to go to minutes, 

+

 or 

 to set minutes.

SET START TIMES

A Start Time is the time of day a program starts watering.

A program only needs one Start Time to run all of its stations.
Turn dial to Start Times.

Select program (A, B, C, or D) by pressing 

PRG

.

Press 

+

 or 

 to change the Start Time in 15 minute increments.

Additional Start Times will repeat the entire program (up to 8 starts per  
program). 
Add start times by pressing 

„

 and setting the next start, if desired.

To eliminate a Start Time:

Press 

+

 or 

 to change the Start Time to 

OFF

, between 11:45 PM and 12:00 

AM (or between 23:45 and 0:00).

SET STATION RUN TIMES

A station is usually a valve, connected to sprinklers. The Run Time sets how 
long the station runs, and how much water is applied.

Turn dial to 

Run Times

.

Select program A, B, C or D by pressing 

PRG

 (display shows program letter).

Station number is shown with run time. Press 

+

 or 

 to set run time.

Press 

„

 to advance to next station desired in the program.

Repeat for each station in program.

SET WATER DAYS

Water Days are the days on which a program waters at the selected  
start time.
Turn the dial to Water Days.

Press 

PRG

 to select the program (A, B, C, or D).

Current water day schedule is shown at bottom of display.
Each program may have Day of Week, Odd Dates, Even Dates, or Interval 
Day programming.

DAY OF WEEK SCHEDULES

Choose the desired watering days of the week.

Select program (A, B, C, or D) by pressing 

PRG

.

Day pointer begins on Monday.
Press 

+

 for water day, press 

 for no water.

       shows water day,       shows no water day.
Pointer will advance to next day after 

+

/

-

 buttons are pressed.

Repeat until week is set correctly.

See Owner’s Manual for 

Odd, Even, and Interval day

 programming or visit  

us online.

RAIN SENSOR BYPASS SWITCH

The bypass switch allows watering, even when the rain sensor is active.

If the bypass switch is enabled, watering will occur as scheduled. If the rain  
sensor is active, the schedule will adjust according to the sensor.

SEASONAL ADJUSTMENT

Adjusts all station run times in all programs by a percentage. Return to 
100% to restore original programming.

Turn dial to 

Seasonal Adjust

.

Press 

+

 or 

 to change run times by a percentage.

Setting changes run times in 5% increments, from 5% to 300%.
50% = half as much water.

SOLAR SYNC

Add optional Solar Sync sensor for automatic daily Seasonal Adjustment to 
local weather conditions.

Select Region (1-4) with 

+

 and 

-

Set Water Adjustment factor (1-10). 

For detailed information, see the Solar 

Sync documentation or visit us online.

MANUALLY OPERATE A SINGLE STATION

Immediately turns on a station.

Turn dial to 

Manual

.

Station run time will flash. Press 

„

 to move to the desired station.

Press 

+

 or 

 to set the desired run time.

Turn dial to 

RUN

 position to run the station.

MANUAL PROGRAM START  

(One Touch Manual Start & Advance)

Immediately turns on a station.

Turn dial to 

RUN

.

Press and hold 

„

 until station 1 appears.

Quickly select another program by pressing 

PRG

.

Wait 3 seconds for watering to begin.
OR: Enter a run time for the station, and all stations will run sequentially 
with that run time, regardless of program.
Press 

„

 to advance to another station, and watering will begin on  

that station.

ADVANCED FEATURES

See manual for advanced settings. 

ICC2

  

CONTROLLER PROGRAMMING INSTRUCTIONS

Date/Time

Start Times

Run Times 

Water Days

Solar Sync

®

Manual

Seasonal Adjust

Control Buttons

Sensor Bypass Switch

①  Station running
②  Sprinkler Off Days
③  Program Indicators
④  Water Days Symbol
⑤  Solar Sync Symbol
⑥  Days of the Week
⑦  Season Adjust %
⑧  Time mode (AM/PM/24) 
⑨  Rain Sensor Active/Override
⑩  Run Time Symbol 
⑪  Start Time Symbol
⑫  Odd/Even/Interval Days


LIT-666-DC-M-US  8/16

LIT-666-ICC2-DoorCard.indd   3

9/23/16   3:34 PM

Reviews: