Hunter Hydrawise Ready Manual Download Page 8

Page: 8 / 82

From the Home screen, navigate to the Controller Status by pressing Status > Controller
Status.

The controller status screen shows your controller’s connection to Hydrawise servers for
synchronizing schedule and weather information.

Status of Connection to Hydrawise Servers

Your Serial Number. Used to link your controller to your account

Connection to Hydrawise Success Rate

Server Status

A successful connection to the Hydrawise servers is indicated by

Sync’d

as the Server

Status.

SERVER STATUS MESSAGES

Message

Description

OK - updated xxx seconds ago

The controller is connected to Hydrawise and last got a
configuration update xxx seconds ago. This is the
normal state.

Wireless Down

Wireless is not connected

OK - Updating certificates

The controller is doing an initial upgrade from version 2.x to 3.x
software. You should only see this once, if the controller is
continually showing this then there is a problem - please contact
Anthony with a video of the problem.

Summary of Contents for Hydrawise Ready














































































Search results

Summary of Contents for Hydrawise Ready

Reviews:

Hunter Hydrawise Ready, Manual, Page: 8 / 82

Search results

Summary of Contents for Hydrawise Ready

Reviews: