Hunter Hydrawise Ready, Manual, Page: 39 / 82

will be presented with a warning dialogue.
5. Select
Configure Offline
and follow the wizard steps.
This wizard will guide you through the steps to set up your controller to run in offline mode
without an internet connection.
If you choose to switch modes when using the compatible model, use the steps below:
1. From the main menu, tap on Settings .
2. Select Offline Programs and Settings.
3. Select Offline Mode.
4. Choose mode and select
Confirm.
If you decide to connect the controller via internet at a later date, the online programming
will sync with controller within a few seconds and override the offline programming.
Offline Mode - Advanced Offline
Mode
Offline Mode
If the controller loses its internet connection for more than 24 hours, you’ll receive a
notification email. The controller will then go into offline mode. In offline mode, your
controller won’t be able to access local weather conditions such as rainfall or evaporation.
As a result, it will revert to a predefined program.
For Smart Watering zones, the controller will adjust each zone’s watering length
Copyright 2020 Hunter Industries. All Rights Reserved. 39