EQUIPMENT INFORMATION 61
When prompted for adding balance weight, touch the
weight icon on the rim. The 3M tape weights will show up
as a selection.
Touch the 3M tape weight to use it.
Figure 254.
If multiple 3M tape weights are set up, touch the weight
that is the closest match to the weight being used.
Figure 255.
Physically hold the 3M tape weight(s) to the
screen. The images on the screen are correctly
scaled.
Display Language
Selects the language for on-screen display.
Print Language
Selects the language for printouts.
Printer
Sets printer output to the desired printer.
Print Preview
Enables or disables print preview.
Figure 251.
The screen will display a list of available set up
options.
Scroll down and touch “3M Tape Weights”.
Touch the “Set Up and Selected Item” button.
Figure 252.
Touch the boxes that match the size and shape profiles of
the 3M tape weights to be used.
Touch “OK” when finished. .
Figure 253.
Note: If the exact profile of the 3M tape
weight(s) to be used is not shown, select the
closest match.Physically hold the 3M tape
weight(s) up to the screen.
Summary of Contents for GSP9200 Touch
