BTT
Battery-Operated
Bluetooth® Tap Timer
Quick Start Guide
ENGLISH
Please read and keep all safety and use instructions. For more information,
visit hunterindustries.com/BTT.
Important Safety Instructions
1. Read, keep, and follow these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
4. Use a Hose Vacuum Breaker where required to prevent backflow to the
water supply.
Bluetooth Information
1. Frequency band of operation: 2400MHz to 2480MHz.
2. Bluetooth: Maximum transit power less than 20 dBm EIRP
3. Bluetooth Low Energy: Maximum power spectral density less than
10 dBm/MHz EIRP
Warnings and Cautions
• Do NOT make unauthorized alterations to this product.
• Keep the product away from fire and heat sources.
• Do not expose products containing batteries to excessive heat (e.g.,
from storage in direct sunlight, fire, or the like).
• The product label is located on the back of the product.
• Replace only with same or equivalent battery type. Dispose of used
batteries according to instructions.
• Do NOT mix old and new batteries, or mix different types or makes
of batteries.
• Store batteries in a cool, dry place at normal
room temperature.
Connecting the Batteries
1. Squeeze the battery compartment tabs
with two fingers to withdraw the battery
compartment.
2. Insert the included 2x AA standard
alkaline batteries into the terminals.
O position.
3. Replace the battery compartment.
4. Test power to the device by pressing the
5. manual button on the front of the device and
6. listen for a click sound. Press again to turn off.
7. NOTE: Manual button mode runs for a
maximum 60 minutes and then shuts off
watering.
Connecting to Water Supply
BTT-100/200
Instructions:
1. Connect the device only to a standard
¾" (19 mm) threaded water supply/hose
faucet outlet.
2. Hand-tighten until secure.
3. Connect a ¾" (19 mm) inlet hose or drip
adapter (Model No. BTT-LOC) to the BTT
outlet.
4. Hand-tighten until secure.
Manual Button
Low Battery Indicator
Manual Button
Low Battery Indicator
Manual Button
Low Battery Indicator
Manual Button
Low Battery Indicator
Connecting to Water Supply
BTT-101/201 Instructions:
1. Connect the device only to a standard ¾" (19 mm) BSP-threaded water
supply/hose faucet outlet. Unscrew the grey adapter to use the 1"
(25 mm) NPT inlet option.
2. Hand-tighten until secure.
3. Connect a ¾" (19 mm) inlet hose, drip adapter (Model No. BTT-LOC) or
quick connect adapter (included) to the BTT outlet.
4. Hand-tighten until secure.
App Programming
1. Download the free Hunter BTT app to a
smartphone device from the App Store for
iOS® devices, or Google Play™ store for
Android™ devices.
•
iOS Compatibility: Requires iOS
9.0 or later. Compatible with
iPhone®.
•
Android Compatibility: Requires
Android 4.4 or above.
2. Be within 32' (10 m) of the timer.
3. Turn on Bluetooth on the
smartphone device.
4. Press the SCAN button and select
the BTT device.
Timer Mode Programming
Timer mode allows for watering at two
different start times from 1 minute to 6 hours,
per watering day.
1. Press the Schedule Icon and select the
Timer tab.
2. Water Days: Select the desired water
days. Save and Confirm.
3. Start Times: Set START TIME 1 and
optional START TIME 2-4. Save and
Confirm.
4. Run Time: Set the desired RUN TIME from
1 second to 6 hours. Save and Confirm.
Cycling Mode Programming
Cycling mode allows the Run Time to repeat
continually after the scheduled interval (Soak
Time) from a Start Time
to an End Time.
1. Press the Schedule Icon and select
the Cycling tab
2. Water Days: Select the desired
water days. Save and Confirm.
3. Start Times: Set START TIME 1
and optional START TIME 2.
Save and Confirm.
4. End Times: Set END TIME 1 and optional
END TIME 2. Save and Confirm.
5. Run Time: Set the desired RUN TIME from
1 second to 24 hours. Save and Confirm.
6. Soak Time: Set optional SOAK TIME, the
time between each Run Time, from 1
second to 24 hours. Save and Confirm.
Additional Settings
1. Press the Settings Icon
2. Renaming your BTT: Select Settings tab and
enter a name in Nickname section. Save and Confirm.
3. Creating a Passcode: In BTT Settings, enter a 4-digit code in the Create
a Passcode section. To disable, press Disable Passcode and Confirm.
