7
©2010 Hunter Fan Co.
44827-01 20100127
figure 9.
moTor assembly
1. Grasp the Telescope Pole firmly and twist the
Adjustment Knob Counter Clockwise to loosen.
Figure 7.
2. Raise the Inner Pole and tighten the Adjustment Knob
by twisting Clockwise until secure.
3. Remove the Motor Knob(7), Motor Bolt(6), and Tilt
Adjustment Knob(8). Loosen the screw above the
Motor Knob(7).
4. Set the Motor(5) on top of the Pole(3), Figure 8.,
and Secure using the Motor Bolt(6) and Knob(7).
Retighten the screw above the motor knob in the slot
to secure motor. Figure 9.
Note: The Motor Bolt has a square cut on the inside of the
head, ensure this fits securely into the square hole in the
Pole. Do not overtighten the Motor Knob, as this could
make it difficult to tilt the motor later.
After securing the motor(5), Screw in the Tilt Adjustment
Knob(8) securely. Figure 10. This Knob allows you to
adjust the fans angle.
figure 7.
figure 8.
figure 10.
(5) Motor
(3) Telescope Pole
(6) Motor
Bolt
(7) Motor
Knob
(8) Tilt Adjustment
Knob
(7) Motor
Knob
(6) Motor
Bolt
(8) Tilt
Adjustment
Knob
Screw
