background image

5

©2010 Hunter Fan Co. 

44827-01   20100127

figure 1.

This appliance is for household use only and may be plugged 
into any 120-volt AC electrical outlet (ordinary household cur-
rent). DO NOT use any other type of outlet.

This unit is suitable for grounded receptacle use only.

The power cord has a grounded plug as shown in Figure 1, and 
must be used with an electrical outlet that can accommodate 
the grounding pin. If your electrical outlet can not accommo-
date the grounding pin, then you must purchase and install 
one of the two types of adapters shown in Figure 2. NOTE: The 
adapters ARE NOT supplied with this fan. Read, follow, and save 
the instructions that are included with the adapter you choose. 
Do not use an adapter if your electrical  outlet can accommo-
date the grounding pin.              \

                                         

lIne Cord safeTy TIPs

  1.  NEVER pull or yank on the cord or the appliance.

  2.  To insert plug, grasp it firmly and guide it into the outlet.

  3.  To disconnect the appliance, grasp the plug and remove it 

from the outlet.

  4.  Before each use, inspect the line cord for cuts and/or 

abrasion marks. If any are found, the appliance should be 
serviced and the line cord replaced. Please return it to our 
Service Department or to an authorized service representa-
tive.

  5.  NEVER wrap the cord tightly around the appliance, as this 

could place undue stress on the cord where it enters the ap-
pliance and could cause it to fray and break.

  6.  DO NOT operate appliance if the line cord shows any dam-

age, if the appliance works intermittently or stops working 
entirely.

Grounded

Plug

Grounding Pin

Grounded Outlet

Box Cover

 

 WARNINg

figure 2.

Grounded Outlet

Box Cover

Metal

Screw

Adapter

Grounding

Means

groundIng

Summary of Contents for 90405















Reviews: