36
After finishing the installation, click on
Content
to call out and check the
certificate content.
To use Https to access the camera, open your browser, and key-in
https:// (IP
address)/
in the address bar. Now your data will be transmitted via encrypted
communications. The browser will check your certificate status. It might show
the following warning message:
Meaning that certificate is self-signed or signed by a distrusted institution.
Click
Proceed anyway
for continuing to the camera page.
SNMP
(Simple Network Management Protocol)
SNMPv1 or SNMPv2: write the name of both Write Community and Read
Community.
