SmarTracks Diagnostics v.3.16 Installation Guide & User Manual
46
8.5.
Agility (COD)
8.5.1.
Illinois Agility Test (IAT)
The Illinois Agility Test (IAT)
is used to test an athlete’s
change of direction speed, i.e., his ability to
change directions rapidly. The athlete should start in an upright position and maneuver through the
represented course with maximum speed. The test should be conducted starting from both the left
and the right side
, to fully evaluate the athlete’s ability.
Setting up the course field
▪
6 cones and 2 Timing Gates are to be set up according to the figures below.
▪
Place one Timing Gate at the start, and one Timing Gate at the finish.
▪
For better measurement results, we advise that the two magnetic elements on the inside po-
sition be angled. For the use of angled mounts, see 4.2.1. Timing Gates Mobile.
Course field for Illinois Agility Test starting from the
right
.
Course field for Illinois Agility Test starting from the
left
.