Humbaur 3000 Series, Operating Instructions Manual

Page: 99 / 106

Cleaning / care
97
MACHT’S MÖGLICH
Testing, care and maintenance
7
Cleaning the trailer / cargo bed
Fig. 32 Cleaning the chassis / cargo bed
1 Tie-down points
2 Drop side hinge
3 Drop side folded down
The loading bridge can be tilted slightly for easier
cleaning of the cargo bed.
The drop sides and stanchions can be opened and
removed.
The cargo bed should be cleaned after any
transport of bulk goods.
WARNING
Wet / smooth components during cleaning!
You could slip – risk of falling!

Use , .

Do not climb on the trailer components to clean the cargo
bed.
 Use a stable ladder for the cleaning work.
 Open and remove the drop sides (Fig. 32 /3)
- see “Removal of the drop sides and stanchions” on
page 56 ff.

Tip the cargo bed.
- see “Manual pump - Tipping the cargo bed” on page 31,
- see “Electro-hydraulic equipment - Tipping the cargo
bed” on page 36,
- see “Towing connection - Tipping the cargo bed” on
page 42.
 Remove coarse debris such as grit, sand and twigs from
the cargo bed / tie-down points / drop side hinges with a
broom.
 Rinse off the cargo bed with the pressure washer.
 Allow the chassis and the cargo bed to dry completely
after cleaning work.
W - 028
2 1
3