Intended Use
ELISYS QUATTRO
- User Manual HUMAN
1-5
If liquid gets inside the instrument, switch it off and disconnect it from the
mains supply. Clean, and dry the respective parts.
Surfaces (floors, work table) must be dry when you are working with the sys-
tem.
Only use the bottles, tubing and components supplied and recommended for con-
taining liquids on the instrument.
Spare fuses must match the values (nominal voltage, nominal current, and
type) specified by the manufacturer.
Always replace blown fuses, don't try to repair them.
Never short-circuit the fuse holder.
Switch the instrument off and disconnect it from the mains supply before serv-
icing.
Only when directed to do so, should power be applied. If power is applied while any
covers are removed, use extreme caution while servicing the system.
Never remove protective guards or secured components since you could ex-
pose live parts in this way.
Electrical connection contacts (plugs, sockets etc.) can be electrically live.
Even after the device has been switched off, components (e. g. capacitors) can be
under voltage as the result of an electrical charge.
All current-carrying parts are sources of danger for an electrical shock.
Don't position the instrument so that it is difficult to operate the disconnecting
device (power supply switch, mains power connector)!
1.2.3
Laser Safety
Care must be taken when operating and testing the bar code scanners as they
use a laser class 2. Never look directly into the laser beam!
Output causes iritations of the eye if stared into the beam for long periods of time.
See for technical data of the laser (bar code scanner).
For operating and testing the laser, no optical devices may be used.
For operating and testing the laser, watches and mirroring jewellery should be re-
moved.
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
1.2.4
Mechanical Safety
Do not place the instrument on a unstable table, cart, or similar.
The instrument may fall, causing serious damage to the system or injure the user.
Summary of Contents for Elisys Quattro
