TYPE B
TYPE B
TYPE A
TYPE A
STEP
2
The Type B Arm Bolt is shorter and will be inserted into the
hole CLOSER to the mechanism. The Type A Arm Bolt is longer
and will be inserted into the hole FARTHER away from the
mechanism.
For easy assembly, place the Seat Cushion (C) face down on a
flat surface. Attach Armrest (D) to the Seat Cushion (C) as
shown using 1 Type A Arm Bolt (H) with 1 washer (K) and 1 Type
B Arm Bolt (I) with 1 washer (K) on each arm.
Tighten the bolts securely with the enclosed Allen Wrench (L).
STEP
2
PREVENTIVE
MAINTENANCE
AND
WARNING
!
• USE THIS PRODUCT ONLY FOR SEATING ONE PERSON AT A TIME.
• DO NOT USE THIS CHAIR AS A STEP STOOL / LADDER.
• DO NOT SIT ON ANY PART OF THE CHAIR EXCEPT THE SEAT.
• DO NOT USE CHAIR ON UNEVEN FLOOR SURFACES.
• DO NOT USE CHAIR UNLESS ALL BOLTS, SCREWS AND KNOBS ARE TIGHTENED.
• EVERY SIX MONTHS, PLEASE MAKE SURE ALL BOLTS, SCREWS AND KNOBS ARE
FULLY
TIGHTENED
TO
ENSURE
STABILITY
.
• IF ANY PARTS ARE MISSING, BROKEN, DAMAGED OR WORN, STOP USE OF THE
PRODUCT
UNTIL
REPAIRS
ARE
MADE
USING
FACTORY
AUTHORIZED
PARTS
.
• DISPOSE OF PACKAGING PROPERLY. PLASTIC BAG IS NOT A TOY. DO NOT USE
PLASTIC
BAG
AS
HEAD
COVERING
–
IT
MAY
CAUSE
SUFFOCATION
.
• FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
• NOTE: SOME SCREWS MAY BE PREASSEMBLED. IF PREASSEMBLED, IGNORE
ASSEMBLY
INSTRUCTIONS
.
Please be careful to use the correct Back Bolts (J).
Assemble the Backrest (A) to the Seat Cushion (C)
using 2 Back Bolts (J) .
Tighten the bolts securely with the enclosed Allen
Wrench (L).
Seat must slide into the slot on back.
STEP
4
STEP
3
STEP
2
STEP
1
Now turn the assembled seat upright and locate the
center hole of the Mechanism over the Seat Post.
Push down firmly until the connection is secure.
r
r
r
r
G
E
F
TYPE B
C
J
J
J
A
L
TYPE B
TYPE C
Press the Casters (G) into the holes at the end of each
leg of the Base (F).
Insert Seat Post (E) into the center hole of the base (F).
L
D
C
D
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
ME7ERG
(
N
)/
ME8ERG
(
N
)
Remove all items from the carton. Verify all components before assembly.
