STEPS TO JUMP START YOUR VEHICLE
USER GUIDE
Model: Alpha 85S
3 steps to fix your problem:
1. Check the clamps connection and the product’s battery is above 20%.
2. Press the Power Button and Flashlight Button simultaneously for 2-3 seconds.
3. The screen will shows “READY”, and go back to start engine ignition.
Warrning: When using the Force Start Function, auto-detection and safety features will be disabled.
1.Insert the jumper cable
into the jump starter and
connect the clamps to the
car battery.
2.‘’READY’’ sign shows on
the screen.
3.Start your car engine.
If the screen doesn’t display anything when you have correctly connected the clamps to your car,
you can use the Force Start Function to enter boost mode.
Why the screen shows nothing when you try to start your car ?
ABOUT THE FORCE START FUNCTION:
ERROR CODE
Reason
Solution
‘’+’’and ‘’-’’ poles of battery
clips reversed.
Reverse the clips and ensure the correct connection.
Press the Power Button and Flashlight Button simultaneously
for 2-3s to start force output. (Force Start Function)
①
Please store it back to where the temperature is
between : -40°F-113°F.
②
Please charge the device at room temperature.
The safe mode will be off automatically after 10 minutes
waiting. (Please do not turn off the product during the
process)
The voltage of the car battery
is between 2-8V.
①
The product’s operating
temperature is too high. (≥113°F)
②
Charge the device at extremely
low or high temperature.
Jump start the battery more than
5 times within 10 minutes, the
product will automatically enter
the safe mode.
ABOUT THE ERROR CODE: