background image

USER GUIDE

Model: Alpha 85

Error Cod

e

Reason

Solution

‘’+’’and ‘’-’’ poles of battery 

clips reversed.

Reverse the clips and ensure the correct connection.

Press the Power Button and Flashlight Button simultaneously 

for 2-3s to start force output. (Force Start Function)

Please store it back to where the temperature is 

between : 5°F-113°F.

Please charge the device at room temperature.

The safe mode will be off automatically after 10 minutes 

waiting. (Please do not turn off the product during the 

process)

The voltage of the car battery 

is between 2-8V.

① 

The product’s operating 

temperature is too high. (≥113°F)

② 

Charge the device at extremely 

low or high temperature.

Jump start the battery more than 

5 times within 10 minutes, the 

product will automatically enter 

the safe mode.

ABOUT THE ERROR CODE:

STEPS TO JUMP START YOUR VEHICLE

 

1.Insert the jumper cable 

into the jump starter and 

connect the clamps to the 

car battery.

2.‘’READY’’ sign shows on 

the screen.

3.Start your car engine.

3 steps to fix your problem:

1. Check the clamps connection and the product’s battery is above 20%. 

2. Press the Power Button and Flashlight Button simultaneously for 2-3 seconds. 

3. The screen will shows “READY”, and go back to start engine ignition.

Warning: When using the Force Start Function, auto-detection and safety features will be disabled.

If the screen doesn’t display anything when you have correctly connected the clamps to your car, 

you can use the Force Start Function to enter boost mode.

Why the screen shows nothing when you try to start your car ?

   

ABOUT THE FORCE START FUNCTION:

Reviews: