5
3. Functions
Functions Function details
Description
Tracking
Real time tracking
According to the set interval time, the default motion mode is
reported to a position data in 30s, and the static mode 300s reports a
position data.
Alarm
Power down alarm
When device checking the voltage is lower than 5V it will have power
down alarm
Over speed alarm
When speed is over than the set speed, device will send message to
user.
Other
functions
Blind area uploading
data
Storage for almost 600pcs and it will upload the data when the signal
is regular
AGPS function
The terminal increases the AGPS support location function and
enhances the positioning effect
Inflexion upload
When the angle that vehicle turned is more than a normal scale it will
send a message to optimize the playback
Remote upgrading
With a software remote upgrading
Low power
consumption
Static mode
The 3D triaxial acceleration sensor can detect the vibration state of
the vehicle in real time, and the upper power is the motion mode.
When the host is stationary for 5 minutes, it is still mode, and the
GPS module is turned off, and the vibration is entered into the motion
mode.
