Hughes HX100, Installation Manual

Page: 15 / 138

• About this document
1037106-0001 Revision B.03-Draft
xv
About this document
Scope and audience This manual describes installing, commissioning,
troubleshooting, and servicing HX50 and HX100 remote
terminals. The manual also provides additional reference
information for the installation and operation of the remote
terminals.
While the HX50 and HX100 share a basic set of features and
functionalities, the HX100 offers these additional features over
the HX50:
•
rack mounting kit
•
higher speed inroutes
The HX100 is packaged in a thin horizontal enclosure and
includes a mounting kit for optional rack installation. The HX50
has a smaller, more portable desktop form-factor and includes an
attachable pedestal base for optional vertical mounting.
Audience profile
This manual is intended for use by the following audiences:
•
Professional installers
•
Installer trainers, who prepare separate instructions for the
installers
Organization This manual is organized into the following chapters and
appendices:
Chapter 1 – Introduction gives an overview of the HX50/HX100
remote terminal.
Chapter 2 – Preparing for the Installation discusses steps that
must be completed before installing an HX50 or HX100 remote
terminal.
Chapter 3 – Installing the Hardware explains how to assemble
and install HX50 and HX100 remote terminals.
Chapter 4 – Commissioning the HX50/HX100 Remote Terminal
explains how to register for use the HX50/HX100, either
manually or using a satellite-based method.