1
HUGHES BOX BLIND
BOW STAND
ASSEMBLY INSTRUCTIONS
FOR HP-67005
Note: It will take
two (2) people
to assemble this box blind.
You must read all instructions before starting assembly!
(When referring to wall letters(A,B,C,&D), all walls are identical except when
referring to Wall D, which is the panel with your door cut out.)
TOOLS REQUIRED FOR ASSEMBLY:
Cordless drill
Measuring tape
Phillips head drill bit
Adjustable wrench or pliers
PARTS LIST:
REQUIRED ITEMS NEEDED See pg.4/5
(1) Roof
(1) 2 x 4 x 49" for wall support #1
(1) Package with screws, nuts, & bolts (extra (2) 2 x 4 x 45 1/2" for wall support #2
included in case of losing them)
(1) 2 x 4 x 42" for wall support #3
(3) Walls with windows cut out bow walls (1) 2 x 4 x 49" door frame (top)
(1) Wall with window and door cut out (2) 2 x 4 x 31- 3/4" door frame #5 & #6
(2) 2 x 4 x 58" for vertical support #7
Hughes Products Company, Inc. assumes no liability for injury or damage to persons
or property resulting from the use of the Hughes Box Blind. The Hughes Box Blind
must be assembled, installed, anchored, and used with care, caution, and common
sense. Anchoring the Hughes Box Blind is the
owner's responsibility
.
