Hughes HN9400, Installation Manual

Page: 43 / 134

Skip this section if you have entered a ZIP code for the antenna location.
1. On the Antenna Location screen ( Figure 15: Antenna Location screen on page 30), click
the Enter Location Manually checkbox.
The Manual Entry of Antenna Location screen appears.
Figure 17: Manual Entry of Antenna Location screen
2. Enter the latitude and longitude for your location.
Enter latitude and longitude in degrees, to the nearest tenth of a degree.
3. Be sure to select from the drop-down list boxes (Latitude: North or South, Longitude: East
or West).
4. Click
Next
.
Note:
There is no verification screen when you manually enter the antenna location.
Entering satellite parameters
1.
On the Satellite Parameters screen, click the Satellite Transponders drop-down list.
31
HN9400 Satellite Router Installation Guide
1038554-0001 Revision B
Chapter 4 Commissioning the satellite router