background image

Hughes 9250 Land Mobile 
Satellite Terminal

Quick Install Guide

The Hughes 9250 Terminal provides mobile communications from a vehicle over the Inmarsat BGAN 
satellite network.

This guide is intended for users experienced with the Hughes 9201 terminal who do not need complete 
instructions to install a terminal. Others should use the user guides referenced below, available on CD-
ROM in the terminal kit.

Procedure summary

Step A: Unpacking the installation kit

 on page 2

Step B: Installing the magnetic mount feet

 on page 3

Step C: Positioning and mounting the antenna

 on page 3

Step D: Positioning and mounting the terminal

 on page 4

Step E: Connecting the cables

 on page 4

Step F: Installing the terminal’s SIM card and battery

 on page 6

Step G: Mounting parts on the accessory mounting plate

 on page 7

Step H: Connecting power

 on page 7

Step I: Connecting to the Internet

 on page 8

Customer support

 on page 8

Coverage Map

 on page 8 and page 9

Related documentation

Hughes 9250 Land Mobile Satellite Modem User Guide

 - 3500153-0001

Hughes 9201 Land Mobile Satellite Modem User Guide

 - 3500152-0001

Tools required for installation

8mm or 5/16" socket or open wrench

3/16” allen wrench

Dykes or cutters

Document number: 3500145-0001

Revision A 2/19/07

 

REMOTE SATELLITE SYSTEMS 

1455 North Dutton Ave Suite A 

Santa Rosa, CA 95401 

(888) 989-8199 

www.remotesatellite.com 

[email protected] 

Summary of Contents for 9250











Reviews: