Using the Web UI
3004149-0001 Revision C
29
To activate this feature, select “On” or “Data” from the drop
down list under
DHCP Automatic Contexts
section, select the
DHCP range of addresses to use if you don’t want to use the
default (.101 -.199). The APN will be the default APN
configured on the
Manage APNs
page.
Once you hit “Apply” you will get a pop-up message saying that
the ACA settings were updated successfully and to take effect
you will have to reboot the terminal.
Once you reboot the terminal, check that the settings took effect.
To see if the context has been setup properly, click on the
Connections
tab>
Manage Connections
Page and this will show
you all contexts that have been setup (active or inactive).
