background image

Dryer Symptom

Possible Cause/Solution

Dryer is noisy

• Check dryer for foreign objects (nails, coins, bobby pins, metal,

plastic toys, etc.). Remove items from dryer.

• Make sure dryer is level. Uneven leveling can cause vibration.
• Normal operating sounds include the heat source going on and off

and the humming of air moving through the dryer and exhaust sys-
tem.

Clothes are too wrinkled

• Check heat setting. Overdrying can cause wrinkling.
• Check load size. Large loads may not tumble properly and may

cause wrinkling.

Clothes have odor

• Check room for odors before drying clothes. Any odor (fried foods,

paint, varnish, cleaners, burning wood, etc.) will transfer to clothing
as the dryer draws air from the room.

• Ventilate room before drying clothes.

Cycle advances too slowly

• When in an Auto-Sensing cycle, the time it takes depends on the

type and size of the load being dried. When clothing has more
moisture, the cycle takes longer than when the clothes are more
dry.

Er

ro

 on digital display

• The dryer’s motor overload protector has cycled.
• The control can be cleared by pressing the Start/Pause button and

the dryer can be restarted by pressing the Start/Pause button
again.

• If this code is displayed again, remove the dryer from use and call

a service person.

 Warranty Repairs

If something should occur with your washer or dryer that re-
quires service please use the service locator at
ca.huebsch.com.

We would like to point out items that would not be considered
a product failure and are not covered under warranty. If a serv-
ice technician is called for the items listed below you will be re-
sponsible for payment of the service call.

• Plugged or restricted venting
• Kinked venting
• Cleaning lint from within the dryer
• Home electrical issues
• Home gas issues
• Foreign objects found inside the dryer

 Contact Information

If service is required, contact the nearest Factory Authorized
Service Center.

If you are unable to locate an authorized service center or are
unsatisfied with the service performed on your unit, contact:

Huebsch
Shepard Street
P.O. Box 990
Ripon, Wisconsin 54971-0990
www.alliancelaundry.com
Phone: 800-553-5120

Date Purchased

Model Number

Serial Number

Troubleshooting

©

 Copyright, Alliance Laundry Systems LLC -

 DO NOT COPY or TRANSMIT

  20

  Part No. D518674EN

Summary of Contents for Alliance Laundry Systems DR7






















Reviews: