HL175201 MILLA TABLE LAMP
www.hudsonvalleylighting.com/mitzi | #mymitzi
ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
•
WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
•
FAILURE TO INSTALL FIXTURE CORRECTLY COULD RESULT IN
SERIOUS INJURY OR DEATH
•
READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION.
•
BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
INSTALLATION
STEP 1.
Remove the table lamp and parts from the Carton.
STEP 2.
Lift up large shade over the socket base and secure with
socket fitter
STEP 3.
Lift small shade over socket fitter and secure with ring
STEP 4.
Install lamp(s). This fixture is rated for 60 watt G lamp.
DO NOT EXCEED RECOMMENDED WATTAGE
STEP 5.
Plug cord into a qualified socket of properly rated
voltage.
STEP 6.
On/Off Switch installed on cord or fixture.
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLY AND MOUNTING DIAGRAM
