HL364201 HEATHER TABLE LAMP
www.hudsonvalleylighting.com/mitzi| #mymitzi
ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
•
WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
POWER OFF BEFLORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
•
FAILURE TO INSTALL FIXTURE CORRECTLY COULD
RESULT IN SERIOUS INJURY OR DEATH
•
READ ALL INSTRUCTIONS BEFORE STARTING
INSTALLATION.
•
BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN
FOUND.
INSTALLATION
STEP 1.
Remove the table lamp and parts from the Carton.
STEP 2.
Insert harp onto the saddle.
STEP 3.
Install the Lamp. This fixture is rated for 60 watt TYPE A15
lamp.
DO NOT EXCEED RECOMMENDED WATTAGE
STEP 4.
Place shade onto harp then secure it with finial.
STEP 5.
Plug cord into a qualified socket of properly rated voltage.
STEP 6.
On/Off switch installed on socket.
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLY AND MOUNTING DIAGRAM
