UO-EPB-1
Operating and configuration instructions
6
UO-EPB1_Manual-en_R1
1.4 Warranty and liability
Only the “General Terms and Conditions” of Johannes Hübner Fabrik elektrischer Maschinen
GmbH apply. These will be provided to the operator at the latest when the order is confirmed or
when the contract is concluded. All warranty and liability claims for personal injury and property
damage are excluded, and the operator's operating permit will be null and void if one or more of
the following apply:
Failure to observe the operating and configuration manual.
Improper use of the function module.
Improper assembly, installation, commissioning and programming of the function module.
Operating the function module despite technical defects.
Independently carrying out mechanical or electrical modifications to function modules.
Independently carrying out repairs.
Catastrophes due to external interference or force majeure.
Use of non-qualified personnel.
Opening the function module.
1.5 Organisational measures
The operating and assembly manual must always be stored easily within reach in the area
where the function module is used.
In addition to the operating and configuration manual, general statutory and other binding
regulations on accident prevention and environmental protection must be observed. Opera-
tors must be trained on these regulations.
Applicable national, local, and system-specific provisions and requirements must be ob-
served.
The operator is obligated to inform personnel of special operating considerations and re-
quirements.
The type plate and any prohibitions or notice signs adhered to the function modules must al-
ways be legible.
Repairs may only be carried out by the manufacturer, or by an agency or individual author-
ised by the manufacturer.
1.6 Copyright protection
NOTE!
Content information, texts, drawings, images, and other illustrations are copyright pro-
tected and subject to industrial property rights. Copying of any kind not associated
with use of the function module is prohibited without a written declaration from the
manufacturer. Violations will result in claims for damages.
1.7 Warranty provisions
Warranty provisions are outlined in the manufacturer's General Delivery Conditions.
1.8 Customer service
Contact persons are available by phone, fax, or e-mail for technical questions. See the manufac-
turer’s address on page 2.
