Hubner TDP 0,7 Series, Assembly Instructions Manual

Page: 8 / 31

D.C. tachometer generator TDP 0,7
8
BETR-TDP0,7-en_R5(2018-12-20)ID74716 .doc
2.6.1 Electrical current
Danger of death from electricity!
There is an immediate danger of death from contact with live components. Damage to
the insulation or individual components can be lethal.
Therefore: If the insulation is damaged turn off and isolate the power supply
immediately; ensure the insulation is repaired. Before commencing any work on the
electrical installation turn off and isolate the power supply to the installation. Ensure
live components do not come into contact with moisture. Otherwise, this can lead to a
short-circuit.
Danger!
fahr!
2.6.2 Rotating shafts and hot surfaces
WARNING!
Risk of injury from rotating shafts!
Touching rotating shafts can result in serious injuries.
Therefore: Do not tinker with moving parts/shafts or work on rotating shafts. Do not
open covers during operations. Ensure no parts are moving before opening any
covers. The encoder can become very hot when operated for longer periods of time.
There is a risk of burns on contact!
2.6.3 Ensure the power supply cannot be reconnected
DANGER!
Danger of death from unauthorized reconnection of the power supply!
There is a risk that the power supply will be reconnected without authorization when
carrying out work, for example when rectifying faults. This represents a serious risk to
the life of those in the danger zone.
Therefore: Turn off and isolate all power supplies to the equipment before
commencing work. Ensure the power supplies cannot be reconnected.