Hubner TDP 0,7 Series, Assembly Instructions Manual, Page: 24 / 31

D.C. tachometer generator TDP 0,7
24
BETR-TDP0,7-en_R5(2018-12-20)ID74716 .doc
7 Disposal
7.1
Disposal procedure
The manufacturer is not obliged to take back the device.
The device is classed as electronic equipment and subject to the WEEE Directive; observe local,
country-specific laws when disposing of the device.
For information on environmentally sound disposal please contact your local authority or a specialist
disposal company.
8 Spare parts
Spare parts are available on demand via the service address on page 2.
NOTE!
When ordering spare parts, always state the serial number of the
device!
9 Annex
9.1
Connection diagram
TDP 0,7 …
Clamping strip (Terminal box):
Electrical connection :

Clockwise rotation: A1 terminal positive
A2 terminal negative

Winding test (repeat) max. 500 V

Suitable connection cable to maintain degree of
protection
Fit cover plate and terminal box lid,
machine is ready for operations!