Hubner TDP 0,7 Series, Assembly Instructions Manual

Page: 7 / 31

D.C. tachometer generator TDP 0,7
7
BETR-TDP0,7-en_R5(2018-12-20)ID74716 .doc
2 Safety
This section provides an overview of all the important safety aspects that ensure
protection of personnel, as well as safe and trouble-free device operation.
If these safety instructions are not complied with significant hazard can occur.
2.1
Responsibility of the owner
The device is used in commercial applications. Consequently the owner of the device is subject to the
legal occupational safety obligations, and subject to the safety, accident prevention, and
environmental protection regulations that are applicable for the device´s area of implementation.
2.2
Intended use
The device has been designed and constructed exclusively for the intended use described here.
Series TDP 0,7 are used for speed monitoring, for instance of electrical and mechanical drives,
hoisting gear, and conveying machines.
Claims of any type due to damage arising from non-intended use are excluded; the owner bears sole
responsibility for non-intended use.
2.3
Improper use

Do not use the device in potentially explosive areas.

The device must not be subjected to mechanical loads in addition to its own weight and
unavoidable vibration and shock loads that arise during normal operations.
Examples for non-permitted mechanical loads (incomplete list):
-
Fastening transport or lifting tackle to the device, for example a crane hook to lift a
motor.
- Fastening packaging components to the device, for example ratchet straps, tarpaulins
etc.
-
Using the device as a step, for example by people to climb onto a
motor.

It is not permitted to use the device in locations higher than 1000 m above sea level.
2.4
Personal protective equipment
Wear personal protective equipment such as safety shoes and safety clothing to minimise risks to
health and safety when carrying out work such as installation, disassembly or commissioning. Adhere
to all applicable statutory regulations as well as the rules and standards determined by the owner.
2.5
Personell
Installation and commissioning as well as disassembly routines must be carried out by skilled
technical staff only.
2.6
Special dangers
Residual risks that have been determined based on a risk analysis are cited below.