Huber MPC Minichiller 280, Manual

Page: 13 / 60

Introduction
Chapter 1 OPERATION MANUAL
V2.4.0en/09.08.21//1.30
Minichiller®
13
The safety information in this operation manual is designed to protect the operating company, the
operator and the equipment from damage. First inform yourself about any residual risks due to
misuse before you start an operation.
1.3.2 Representation of safety identifiers on the temperature control unit
The following pictograms are used as safety identifiers. The table gives an overview of the safety
identifiers used here.
Identifier Description
Mandatory sign
- Observe the instructions
Warning sign
- General warning sign
- Observe the instructions
- Warning of electrical voltage
- Warning of hot surface
- Warning of flammable substances
1.3.3 Proper operation
Operating the temperature control unit in a potentially explosive area
DEATH THROUGH EXPLOSION

Do NOT install or start up the temperature control unit within an ATEX zone.
Safety information and
procedure
Overview