Huber MPC Minichiller 280, Manual

Page: 12 / 60

Introduction
OPERATION MANUAL Chapter 1
Minichiller®
V2.4.0en/09.08.21//1.30
12
1 Introduction
1.1 Identification / symbols in the operation manual
The following identifications and symbols are used in the texts and illustrations.
Identification / symbol Description
→ Reference to information / procedure.
»TEXT«
Reference to a chapter in the operation manual. In the digital version, the text
is clickable.
>TEXT<
[NUMBER]
Reference to the wiring diagram in the annex. The designation and the search
digit are specified.
>TEXT<
[LETTER]
Reference to a drawing in the same paragraph. The designation and the
search digit are specified.
▪ List, first level
‒ List, second level
1.2 Information on the EU Declaration of Conformity
The equipment complies with the basic health and safety requirements of the European Directives
listed below:
▪ Machinery Directive
▪ Low Voltage Directive
▪ EMC Directive
1.3 Safety
1.3.1 Symbols used for Safety Instructions
Safety instructions are marked by the below combinations of pictograms and signal words. The
signal word describes the classification of the residual risk when disregarding the operation manual.
Denotes an immediate hazardous situation that will result in death or serious injuries.
Denotes a general hazardous situation that may result in death or serious injuries.
Denotes a hazardous situation that can result in injury.
Denotes a situation that can result in property material damage.
Denotes important notes and usable hints.
Overview