INSTALLATION INSTRUCTION MANUAL
15W
LED FLOOD LIGHT,
100-277VAC
6(5,(6
:
:/(')/22'/,*+7
,QWURGXFWLRQ
◼
This LED Flood light uses the latest in solid state lighting technology for long life,
low maintenance, and high efficiency.
◼
Can be used from any nominal input voltage supply from 100-277V, 60Hz AC.
◼
Suitable for wet locations
Note: Save these instructions for future reference.
,QVWDOO*XLGHOLQHV
,WHP
0RGHO
,QSXW9ROWDJH
3RZHU
)DFWRU
:DWW
,QSXW
&XUUHQW
$
:)/22'/,*+7
1
9$&
:
$
Warning:
To avoid the risk of fire, explosion, or electric shock, this product should be installed,
inspected, and maintained by a qualified electrician only, in accordance with all applicable
electrical codes.
Warning:
To avoid electric shock:
• Be certain electrical power is OFF before and during installation and maintenance.
• Luminaire must be connected to a wiring system with an equipment-grounding conductor.
Warning:
To avoid explosion:
• Make sure the supply voltage is the same as the rated luminaire voltage.
• Do not operate in ambient temperatures above those indicated on the luminaire
nameplate.
• •Keep lens tightly closed when in operation.
Customer Service: 1-800-447-1723
PAGE 1
of
2
93109030
0
8
/1
5
/19
For supply connections use wire rated for at least 90
°
C
0RGHOQXPEHUSDUDPHWHUOLVW