Power Line Carrier ____________________________________________________________________
RF-MCGARDPRO
Hubbell Power Systems, Inc.
–
RFL™
Products
July 1, 2022
©2022 Hubbell Incorporated
5-11
The following counters increment on the rising edge of the accompanying function. For
example, if “Trip Key 1” goes Low to High the counter will increment. It will not increment
when “Trip Key 1” goes High to Low.
Counters Receiver:
14.
Trip 1 RX Count:
Indicates the RX Key1 count.
15.
Trip 2 RX Count:
Indicates the RX Key2 count.
16.
RX Alarm Count:
Indicates the RX alarm count.
Counters Transmitter:
17.
Trip 1 Key Count:
Indicates the TX Key1 count.
18.
Trip 2 Key Count:
Indicates the TX Key2 count.
19.
Reflected Power Alarm:
Indicates the RPM fail/alarm count.
FSK Configuration
– General
Menu location: Configuration > PLC > (General).
Ensure that the “General” tab is clicked. If not already enabled, the module, receiver and the
transmitter should be enabled by clicking the ON/OFF button in the appropriate region of the
web page.
Once all the settings are complete click the “Save” button at the bottom right of
the web page to make the settings permanent.
The TX/RX frequency mode tables will be
automatically populated with the
actual frequency
based on your current settings.
