Hubbell GARD Pro, Instruction Manual

Page: 103 / 345

System Configuration __________________________________________________________________
RF-MCGARDPRO Hubbell Power Systems, Inc. – RFL™ Products
July 1, 2022 ©2022 Hubbell Incorporated
4-28
Output Mapping Configuration
Menu location: Configuration > Output (Mapping).
Some typical output mapping choices are described below the web page example. Output
mapping choices are set-up in the system logic. The system logic provides a series of choices for
mapping various points programmed in the system logic to physical outputs. The output mapping
may also be configured in the
Logic Configuration
section.
Mapping tab Dropdown menu for mapping
See below
Figure 4-28. Output Mapping
Not Used:
If a hardware output is mapped to “NOT USED,” the hardware output will
not be tied to the logic and will not operate under any situation.