Pub. 42004-438M
300 Series Emergency Telephone Manual
Page 6 of 50
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-438M.docx
04/19
Non-Emergency Call Operation
Applicable to telephones equipped with a
CALL
push button and keypad, with or without a
HELP
push
button.
Make non-emergency calls on telephone models equipped with keypads as follows:
1.
Press the
CALL
push button (dial tone can be heard over the speaker).
2.
Dial the desired number using the keypad.
The
C
ALL
R
ECEIVED
W
HEN
L
IT
indicator (LED) operates as follows:
The indicator will begin to flash when the
C
ALL
push button is pressed and will light (steadily)
when the telephone detects audio after the call is answered.
or
The indicator will begin to flash when the
C
ALL
push button is pressed and will light (steadily)
when the called party acknowledges receiving the call by transmitting a DTMF
#
or
*
after
answering the call.
3.
Two-way, hands-free conversation can now occur.
4.
Press the
CALL
push button upon completion of the call (hang up).
N
OTE
:
The
CALL
push button can be configured to auto-dial, overriding the keypad dialing feature.
This operation can be used to call a central telephone number and use the keypad to make
feature selections.
Non-Emergency Assistance Operation—Models 396-00x and 396-
001FS
1.
Press the
ASSISTANCE
push button to place an immediate call to a pre-programmed assistance
telephone number; typically, a dormitory, garage, or general assistance/information office).
The
C
ALL
R
ECEIVED
W
HEN
L
IT
indicator (LED) operates as follows:
The indicator will begin to flash when the
C
ALL
push button is pressed and will light (steadily)
when the telephone detects audio after the call is answered.
or
The indicator will begin to flash when the
C
ALL
push button is pressed and will light (steadily)
when the called party acknowledges receiving the call by transmitting a DTMF
#
or
*
after
answering the call.
2.
Two-way hands-free conversation can now occur.
Receiving a Call
RED ALERT
®
telephones can be programmed to auto-answer incoming calls. The telephone will
automatically answer when the emergency telephone extension is dialed. It will then generate a pair of
triple
beep
tones and two-way, hands-free conversation can occur.
