Pub. 42004-456D
Division 1 VoIP Telephones
Page 6 of 18
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-456D.docx
03/20
Figure 6. Model 352-703 (On-hook)
Place a call:
1.
Remove the headset from the headset activation bracket.
2.
Flip the headset bracket forward to the off-hook position.
3.
Adjust the volume to the desired level using the volume control push button, located on the front
cover.
4.
Dial the desired number.
5.
Flip the headset activation bracket to the vertical position (on-hook) to hang up. If applicable, place
the headset on the bracket after the completion of the call. Otherwise, disconnect the flexible
receptacle and plug by unscrewing the two ends, and pulling them apart. When disconnected,
reattach the sealing cap to the end of the receptacle.
Figure 7. Model 352-703 (Off-hook)
