Pub. 42004-553A
Model 379-003 E3 IP MRM (Monitored Relay Module) Station
Page 4 of 4
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-553A.docx
07/20
Replacement Parts
Table 2. Replacement Parts
Part Number
Description
999-02-1203-001
PCBA, E3
IP CPU
999-02-3011-002
PCBA, E3 IN8
999-02-3002-001
PCBA, Relay Module
40404-011
Power Supply, 24 V dc, 25 W
Reference Documentation
For additional information, please refer to the standard publication listed below. GAI-Tronics
publications are located on the GAI-Tronics website at
E3 Monitored Input Modules (MIM) and Monitored Relay Modules (MRM) manual ..................................
...................................................................................................................................502-20-0672-001 ISS 4
Specifications
Electrical
Power requirements ................................................................. 120–230 V ac, 50/60 Hz, 300 mA maximum
N
OTE
:
Power requirements do
NOT
include power switched to external devices such as beacons or
strobes.
Maximum current draw and switching voltage (per output) ............................... 5 A @ 30 V dc or 132 V ac
Mechanical
Dimensions ..................................................... 13.00 W × 14.30 H × 6.23 D in (330.2 × 363.2 × 158.2 mm)
Weight ..................................................................................................................................................... 19 lb
Environmental
Humidity ........................................................................................... 95% non-condensing relative humidity
Temperature range ................................................................................... −22 ºF to 158 ºF (−30 ºC to 70 ºC)
Environmental rating ..................................................................................................................... NEMA 4X
N
OTE
:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his expense.