17
6 Detail Testing procedures
6.1 Start-up
Press
【
】
key to turn on the tester, The screen will display the relevant
information into the measurement state.
6.2 Turn On or turn off
Tester can be turn on or trun off by press
【
】
key in any display status.
6.3 Testing
The tester will enter the main display interface after turn on, as the following
figure.
The measured values are displayed with big font in this interface, and multiple
shortcut key operation functions supplied.
6.3.1 Explanation of the main display interface
Battery information:
displaying rest capacity when no charging, and
displaying charging degree when charging.
Impact direction:
current impact direction.
Average value indicator:
average value will be displayed when impact times
setting has been achieved.
Hardness scale:
the hardness scale of current measuring value.
Measured value:
current single measured value (without average value
indicator), current average value (with average value indicator). It expresses
the value is more than conversion or measuring range when
is displayed;
and it expresses the value is lower than conversion or measuring range when
is displayed.
Material:
material that has been set currently.
Impact times:
impact times that has been finished will be displayed when
measuring; Impact times that has been set will be displayed when impact
Impact
Direction
Material
Impact Type
Statistics
Hardness Scale
Battery
Average value
Function key
