Changing watch faces
Before using this feature, update the Health app and your device to the latest versions.
Your phone must run HarmonyOS 2/Android 6.0/iOS 12.0 or a later version.
•
Method 1: Touch and hold anywhere on the home screen until the device vibrates. When
the home screen zooms out and shows a frame, swipe left or right to select your preferred
home screen design.
•
Method 2: On the device, go to Settings > Display > Watch face, then swipe left or right
to select your preferred home screen design.
•
Method 3: Ensure that your watch is connected to the Health app, open the Health app, go
to Watch faces > More, and touch INSTALL under your preferred watch face. The device
will automatically switch to the chosen one once it is installed. Alternatively, touch a watch
face that you have installed, then touch SET AS DEFAULT to switch to it.
Delete a watch face: Open the Health app, go to Watch faces > More > Mine > Edit, and
touch the cross icon in the upper right corner of a watch face to delete it.
Setting an alarm
Method 1: Set an alarm on your device.
1
Enter the app list, select Alarm, and touch
to add an alarm.
2
Set the alarm time and repeat cycle and then touch OK. If you do not set the repeat cycle,
the alarm will be a one-time alarm.
3
You can touch an alarm to delete it or modify the alarm time, tag, and repeat cycle. Only
event alarms can be deleted.
Method 2: Set an alarm in the Health app.
Smart alarm:
1
Open the Health app, touch Devices then your device name, and go to Alarm > SMART
ALARM.
2
Set the alarm time, smart wakeup time, and repeat cycle.
3
Touch √ in the upper right corner (for HarmonyOS/Android users) or touch Save (for iOS
users) to finish configuring the settings.
4
Return to the home screen and swipe down to sync the alarm settings to your device.
5
You can touch an alarm to modify the alarm time, smart wakeup time, and repeat cycle.
Event alarm:
1
Open the Health app, touch Devices then your device name, and go to Alarm > EVENT
ALARM.
2
Touch Add at the bottom to set the alarm time, tag, and repeat cycle.
Getting Started
4
