Huawei V100R002C01 User Manual Download Page 45

Page: 45 / 122

Figure 3-9

The driver is successfully installed

----End

3.6.3 Installing the ES3000 Driver in VMware

Operation Scenarios

You need to install the ES3000 driver on the server before using an ES3000.

NOTE

If you install multiple ES3000s in a server, you need only to install the driver once.

Preparations

Before installing the ES3000 driver, check that:

You have properly installed the ES3000 in the server.

You have uploaded the driver package to the server by using WinSCP or other software.

Procedure

Step 1

Step 2

Install the ES3000 driver.

NOTICE

If you use the ESXi 5.0 OS, the driver package must be stored in

directory.

Tecal ES3000 High Performance PCIe SSD Card
User Guide

3 Installation and Configuration

Issue 04 (2014-03-05)

Huawei Proprietary and Confidential

Summary of Contents for V100R002C01



























































































































Search results

Summary of Contents for V100R002C01

Reviews:

Related manuals for V100R002C01

Brands by name

Popular brands

Huawei V100R002C01, User Manual

Search results

Summary of Contents for V100R002C01

Reviews:

Related manuals for V100R002C01

Brands by name

Popular brands