Huawei UPS5000-E-75K-BF User Manual Download Page 102

Page: 102 / 242

UPS5000-E-(25 kVA-75 kVA)-BF
User Manual

3 Installation

Issue 07 (2019-12-13)

Step 7

Push the upper cover forwards as shown in the following figure to reinstall it, and screw it.

Figure 3-66

Reinstalling the upper cover

----End

3.5 Installation Verification

If the check results of listed items 8 and 9 in

Table 3-10

do not meet the acceptance criteria,

the UPS may be damaged.

Table 3-10

Installation checklist

No.

Item

Acceptance Criteria

UPS installation

The UPS is securely installed and does not tilt
due to vibration.

Neat arrangement

The UPS and its adjacent cabinets are neatly
arranged and secured with connecting plates.

Cable layout

Cables are routed properly and cable routing
meets customer requirements.

Cable labels

Both ends of a cable are labeled. Labels are

Summary of Contents for UPS5000-E-75K-BF



















































































































































































































































Search results

Summary of Contents for UPS5000-E-75K-BF

Reviews:

Huawei UPS5000-E-75K-BF, User Manual, Page: 102 / 242

Search results

Summary of Contents for UPS5000-E-75K-BF

Reviews: