Powering On/Off
9
G
ett
ing S
tar
ted
2
2
Insert the memory card into the slot, as shown in
the following figure.
3
To remove a memory card, unload the back
cover out of the phone. Then press the memory
card gently. Now the memory card will pop up
automatically. Then take it out as shown in the
following figure.
Powering On/Off
Powering On
Ensure that the SIM card is in your phone and that
the battery has been charged.
Press and hold
to power on your phone.
Powering Off
Press and hold
to power off your phone.
Access Codes
If you have set the phone password and the PIN is
ON
, you have to enter the corresponding access
codes when you power on your phone. For setting
and changing the access codes, please refer to "Set-
tings/Security Setup" on page 51.
◆
Phone Password
The phone password is used to protect your phone
from unauthorized use. The phone password is
preset as 0000 for your phone.
U121.book Page 9 Friday, June 6, 2008 11:44 AM