Huawei TE80 Administrator'S Manual Download Page 72

Page: 72 / 178

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide

5 Microphone and Speaker

Issue 02 (2014-03-30)

Huawei Proprietary and Confidential

Step 2

Select

Save

----End

5.5 Enjoying Stereo Audio

In dual-audio-channel mode, stereo effect audio can be enjoyed allowing users to accurately
locate the direction from which the sound comes, gaining a true-to-life experience.

Background

For details about the VPM220, see

5.1.1 Connecting a VPM220

Procedure

Step 1

Connect the endpoint to a microphone and a stereo acoustic system.

During a conference, move the microphone only when required. Otherwise, the quality of the stereo
audio heard by remote sites is affected.

Step 2

Choose

Advanced

Settings

Audio

Audio Input

. Select audio input sources.

All available audio input sources are selected by default.

Step 3

Select

Save

to return to the

Settings

screen.

Step 4

On the

Settings

screen, choose

Conference

Advanced Settings

and set

Audio protocol

AAC_LD

HWA-LD

. Then, set

Audio channels

Two

----End

Summary of Contents for TE80



















































































































































































Search results

Summary of Contents for TE80

Reviews:

Related manuals for TE80

Brands by name

Popular brands

Huawei TE80, Administrator'S Manual

Search results

Summary of Contents for TE80

Reviews:

Related manuals for TE80

Brands by name

Popular brands