Huawei TE40 Administrator'S Manual Download Page 130

Page: 130 / 180

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide

11 Upgrading

Issue 01 (2013-09-30)

Huawei Proprietary and Confidential

122

Parameter

Description

Setting

Upgrade interval

Specifies the upgrade interval. This
parameter is available only when

Auto

upgrade

is selected.

The default value is

0.5

Value range: 0.5 h to 24
h.

Server address

Specifies the IP address of the server
that stores the upgrade files for your
endpoint.

This parameter cannot
be left blank.

Example:
http://200.55.55.100/

User name

Password

Specify the user name and password
your endpoint uses to access the server.

No default value is set
for this parameter.

Step 3

Choose

Save

----End

11.2 Tool Upgrade

You can use a computer to locally upgrade the endpoint.

Prerequisites

Before the upgrade, ensure that:



The target software is saved to the computer.



The computer is connected to the endpoint using a straight-through cable, crossover
cable, or switch.



You have obtained the upgrade password. The default upgrade password is

Change_Me

For details, see

7.4 Setting the Upgrade Password

Upgrading a Single endpoint

Step 1

Power on the computer and endpoint.

Step 2

Extract the compressed software upgrade package on the computer.

Step 3

Run

UpgMaster.exe

to display the window shown in

Figure 11-1

Summary of Contents for TE40





















































































































































































Search results

Summary of Contents for TE40

Reviews:

Related manuals for TE40

Brands by name

Popular brands

Huawei TE40, Administrator'S Manual

Search results

Summary of Contents for TE40

Reviews:

Related manuals for TE40

Brands by name

Popular brands