l
When you are scheduling or initiating a conference on an MCU, select
Support
recording
under conference settings.
Procedure
Step 1
Log in to the TE30 web interface. Choose
Conference
>
Control Recording
.
Step 2
Click
Start
.
The recording starts.
----End
Follow-up Procedure
To stop recording, click
Stop
.
11.4.10 Backing Up Settings
The administrator can use the
One-Click Backup
function to create a configuration backup file
for the TE30. If some parameter settings under
System Settings
are inadvertently deleted or
modified, you can use this backup file to restore all the settings in the
System Settings
area to
pre-backup settings.
Background
If a configuration backup file is already stored on your TE30, the new configuration backup file
replaces the original one when you back up the settings again.
Procedure
Step 1
Log in to the TE30 web interface. Choose
System Settings
>
Installation
.
The
Installation
page is displayed.
Step 2
Click
One-Click Backup
.
Step 3
On the
One-Click Backup
page, click
Back Up Settings
.
The TE30 then starts to create a configuration backup file. You are notified when the backup is
complete.
----End
Follow-up Procedure
To restore all the settings in the
System Settings
area to the latest pre-backup settings, select
Restore Settings
. Your endpoint will then restart and restore the settings.
11.4.11 Capturing Photos
To ensure that a conference runs smoothly, you may need to monitor how the TE30 operates
and whether the local and remote videos are displayed properly in the conference room. From
the TE30 web interface, you can capture photos and view local and remote videos and
presentations.
HUAWEI TE30 Videoconferencing Endpoint
User Guide
11 Web-based Remote Management
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
99
