Huawei TaiShan 200 23280 User Manual Download Page 93

Page: 93 / 191

Figure 5-46 Boot Type Order screen

Step 4 Select a boot option, press + or – to move the option upward or downward to

change the boot order.

NO TE

The server boots in the order specified on this screen.

Step 5 Press F10.

The system displays the "Save configuration changes and exit?" dialog box.

Step 6 Select Yes and press Enter.

The server automatically restarts for the settings to take effect.

----End

5.11.8.3 Configuring the PXE Function of an NIC

Configuring the LOM PXE

Step 1 Access the BIOS. For details, see

5.11.8.1 Accessing the BIOS

Step 2 Press ← or → to switch to the Advanced screen shown in

Figure 5-47

TaiShan 200 Server (Model 2280)

User Guide

5 Installation and Configuration

Issue 09 (2021-01-12)

Summary of Contents for TaiShan 200 23280
































































































































































































Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands

Huawei TaiShan 200 23280, User Manual

Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands