Huawei TaiShan 200 23280 User Manual Download Page 3

Page: 3 / 191

About This Document

Purpose

This document describes the appearance, structure, components, and

specifications of the 2280 balanced model (2280 for short) of the TaiShan 200

server, and provides guidance for installing, connecting, powering on, powering

off, configuring, installing OS, and troubleshooting the 2280.

Intended Audience

This document is intended for:
●

Huawei technical support engineers

●

Technical support engineers from channel partners

●

Enterprise administrators

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which,

if not avoided, will result in death or serious

injury.

Indicates a hazard with a medium level of risk

which, if not avoided, could result in death or

serious injury.

Indicates a hazard with a low level of risk which,

if not avoided, could result in minor or moderate

injury.

TaiShan 200 Server (Model 2280)

User Guide

About This Document

Issue 09 (2021-01-12)

Summary of Contents for TaiShan 200 23280
































































































































































































Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands

Huawei TaiShan 200 23280, User Manual

Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands