Huawei TaiShan 200 23280 User Manual Download Page 102

Page: 102 / 191

NO TE

You can log in to

Kunpeng Computing

, and click the product model to go to the document

page of the product. Then search, browse, and download the installation guide of each OS.

5.11.10 Upgrading the System

NO TE

Upgrade server drivers, firmware, and management software as needed.

Obtaining Documents

TaiShan Rack Server Upgrade Guide
TaiShanServer iDriver Driver Version Mapping

Release Notes

Upgrading Firmware or Management Software

Upgrade the raid card firmware, mainboard CPLD and drive backplane CPLD on

the iBMC WebUI. For details, see the

TaiShan Rack Server Upgrade Guide

Updating Drivers

If the existing driver versions on a server are inconsistent with those in the driver

version mapping, install the drivers of required versions. Otherwise, the server may

operate abnormally. For details, see the OS installation guide.

5.12 Initial Configuration (iBMC V3.01.00.00 or Later)

If the server uses the Hi1711 management chip, the iBMC version is in

X.XX.XX.XX

format, which is also referred to as

VX.XX.XX.XX

. For example, 3.01.00.00 is also

referred to as V3.01.00.00.

5.12.1 Default Data

Table 5-7 Default data

Item

Name

Default Value

iBMC

management

network port

data

IP address

and subnet

masks

● IP address: 192.168.2.100
● Subnet mask: 255.255.255.0

iBMC login

data

User name

and

password

● User name: Administrator
● Password: Admin@9000

BIOS data

Password

Admin@9000

TaiShan 200 Server (Model 2280)

User Guide

5 Installation and Configuration

Issue 09 (2021-01-12)

Summary of Contents for TaiShan 200 23280
































































































































































































Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands

Huawei TaiShan 200 23280, User Manual

Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands