Huawei SUN2000-60KTL-M0 User Manual Download Page 80

Page: 80 / 127

5. Insert the USB flash drive into a computer and check the exported data.

NO TE

When the configuration export is complete, the boot script file and exported file are in

the root directory of the USB flash drive.

7.1.2 Importing Configurations

Prerequisites

A complete configuration file has been exported.

Procedure

1. Click Local maintenance script on the app to generate a boot script file, see

the

FusionSolar APP and SUN2000 APP User Manual

2. Import the boot script file to a PC.
3. Replace the exported boot script file in the root directory of the USB flash

drive with the imported one.

NO TICE

Replace the boot script file only and keep the exported files.

4. Connect the USB flash drive to the USB port. The system automatically

identifies the USB flash drive and executes all commands specified in the boot

script file. View the LED indicator to determine the operating status.

NO TICE

Ensure that the ciphertext in the boot script matches the login password for

logging into the SUN2000 app or entering the Device Commissioning screen

on the FusionSolar app. Otherwise, the user account will be locked for 10

minutes after the USB flash drive is inserted for five consecutive times.

SUN2000-(60KTL, 65KTL)-M0

User Manual (Mexico Edition)

7 Man-Machine Interactions

Issue 06 (2020-10-12)

Summary of Contents for SUN2000-60KTL-M0
































































































































Search results

Summary of Contents for SUN2000-60KTL-M0

Reviews:

Related manuals for SUN2000-60KTL-M0

Brands by name

Popular brands

Huawei SUN2000-60KTL-M0, User Manual

Search results

Summary of Contents for SUN2000-60KTL-M0

Reviews:

Related manuals for SUN2000-60KTL-M0

Brands by name

Popular brands